4 Steps Of Doing Hardwood Floor Refinishing Homeowners need to know that together with planning and patience and skill, they ought to have specialized equipment as well when considering hardwood floor refinishing. Out of all the projects for home improvement that any homeowners can take, this is something that needs research, knowledge and time. You will go through different steps or stages that include preparing, evaluating, sanding as well as sealing your hardwood floors. In any of the said steps or stages, just a slight touch of error is more than enough to lead to problems that may last for long. Yes, you can refinish the entire hardwood flooring alone but, it is wise that you get some help at some parts. For this kind of flooring, expect that it will take you 1 to 3 weeks to carry out refinishing. Step 1. Checking the hardwood floor – you’ll have to determine whether or not the hardwood floor planks will be a laborious process. You have to assess if the floor suffered from water, pet urine or spills. You may pull up one threshold of the door in order to see if the boards are so thin to be sanded. You additionally need to find out if the last sealant was varnish, wax or polyurethane. Of course, to know if the hardwood flooring have deep gouges or dramatic wear patters, you’ve got to give it a thorough examination.
Why No One Talks About Resources Anymore
Step 2. Preparing the flooring – before you do hardwood floor refinishing, you must prepare the flooring first. If most hardwood planks don’t have scratches or holes, are at least 3/4 inches thick and have same amount of sealant, you’re ready to start with the preparation.
Smart Tips For Finding Resources
First thing that you’ve got to do is clean the whole floor area. It is vital as well to file holes from nails, staples or scrapes. You need to pull up the thresholds as well as the baseboards too. You need to do all the floors to keep it consistent even if one of the floors not looks good. Step 3. Sanding – without a doubt, this step is the most demanding and the most daunting that you would do. You will be renting drum sander equipment, which is quite loud to use and, you need to roll it onto the entire hardwood flooring 3x to be able to peel off the top layer of the finish. Step 4. Staining and sealing – before you get started on this step, you have to be sure that every single bit of sawdust is gone so it doesn’t contaminate the sealing and staining applications. You need to seal it with thin layer of sealant to be certain that the stain is dry before application once you are done staining the flooring.